IviCounter Configure Time Interval Stop Holdoff
IviCounterTimeIntervalStopHoldoff Extension Group
Configures the stop holdoff time in seconds. The holdoff time starts with the time interval start channel trigger, then delays for the specified time. After the specified delay time, the time interval stop channel trigger is enabled. Potential time interval stop channel triggers are ignored during the specified stop holdoff.
|
instrument handle The instrument handle you obtain from the IviCounter Initialize VI or IviCounter Initialize With Options VI. The handle identifies a particular instrument session.
Default Value: None |
|
time (0 s) Specifies the value of the stop holdoff time in seconds. The driver sets the IviCounter Time Interval Stop Holdoff property to this value.
Units: seconds Default Value: 0.0 |
 |
error in (no error) The error in cluster can accept error information wired from VIs previously called. Use this information to decide if any functionality should be bypassed in the event of errors from other VIs.
The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed. |
 |
instrument handle out The instrument handle you obtain from the IviCounter Initialize VI or IviCounter Initialize With Options VI. The handle identifies a particular instrument session.
Default Value: None |
|
error out The error out cluster passes error or warning information out of a VI to be used by other VIs.
The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed. |