IviDownconverter Configure Frequency Step Dwell [FST]
IviDownconverterFrequencyStep Capability Group
This VI configures the frequency stepping dwell.
![IviDownconverter Configure Frequency Step Dwell [FST].vi](ividownconverter_configure_frequency_step_dwell_[fst]c.gif)
|
instrument handle The instrument handle that you obtain from the IviDownconverter Initialize or IviDownconverter Initialize With Options VI. The handle identifies a particular instrument session.
Default Value: None |
 |
single step enabled (False) Enable or disable single step mode. The driver uses this value to set the IviDownconverter Frequency Step Single Step Enabled [FST] property.
Default Value: FALSE |
 |
frequency step dwell (1.0 s) Pass the duration of one step. The driver uses this value to set the IviDownconverter Frequency Step Dwell [FST] property.
Default Value: 1.0 s Notes: (1) The dwell time starts immediately at the start of each step. No settling time is added. This value is valid only when IviDownconverter Frequency Step Single Step Enabled [FST] is FALSE. |
 |
error in (no error) The error in cluster can accept error information wired from VIs previously called. Use this information to decide if any functionality should be bypassed in the event of errors from other VIs.
The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed. |
 |
instrument handle out The instrument handle that you obtain from the IviDownconverter Initialize or IviDownconverter Initialize With Options VI. The handle identifies a particular instrument session.
Default Value: None |
 |
error out The error out cluster passes error or warning information out of a VI to be used by other VIs.
The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed. |