IviDownconverter Configure Frequency Sweep Time [FSW]
IviDownconverterFrequencySweep Capability Group
This VI configures the duration of one frequency sweep.
![IviDownconverter Configure Frequency Sweep Time [FSW].vi](ividownconverter_configure_frequency_sweep_time_[fsw]c.gif)
|
instrument handle The instrument handle that you obtain from the IviDownconverter Initialize or IviDownconverter Initialize With Options VI. The handle identifies a particular instrument session.
Default Value: None |
 |
frequency sweep time (1.0 s) Pass the duration of one LO sweep from start to stop frequency. The driver uses this value to set the IviDownconverter Frequency Sweep Time [FSW] property.
Default Value: 1.0 s |
 |
error in (no error) The error in cluster can accept error information wired from VIs previously called. Use this information to decide if any functionality should be bypassed in the event of errors from other VIs.
The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed. |
 |
instrument handle out The instrument handle that you obtain from the IviDownconverter Initialize or IviDownconverter Initialize With Options VI. The handle identifies a particular instrument session.
Default Value: None |
 |
error out The error out cluster passes error or warning information out of a VI to be used by other VIs.
The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed. |