IviDownconverter Configure IF Output Video Detector Bandwidth [VDB]
IviDownconverterVideoDetectorBandwidth Capability Group
This VI configures the bandwidth of the active IF output video detector.
![IviDownconverter Configure IF Output Video Detector Bandwidth [VDB].vi](ividownconverter_configure_if_output_video_detector_bandwidth_[vdb]c.gif)
|
instrument handle The instrument handle that you obtain from the IviDownconverter Initialize or IviDownconverter Initialize With Options VI. The handle identifies a particular instrument session.
Default Value: None |
 |
video detector bandwidth (1.0e6 Hz) Pass the 3 dB bandwidth of the active IF output video detection filter. The driver uses this value to set the IviDownconverter IF Output Video Detector Bandwidth [VDB] property.
Default Value: 1.0e6 Hz |
 |
instrument handle out The instrument handle that you obtain from the IviDownconverter Initialize or IviDownconverter Initialize With Options VI. The handle identifies a particular instrument session.
Default Value: None |
 |
error in (no error) The error in cluster can accept error information wired from VIs previously called. Use this information to decide if any functionality should be bypassed in the event of errors from other VIs.
The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed. |
 |
error out The error out cluster passes error or warning information out of a VI to be used by other VIs.
The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed. |