IviPwrMeter Abort
IviPwrMeterBase Capability Group
This VI aborts all previously initiated measurements and returns the power meter to the Idle state. You initiate measurement with the IviPwrMeter Initiate VI.
 | Note (1) This VI does not check the instrument status. Typically, you call this VI only in a sequence of calls to other low-level driver VIs. The sequence performs one operation. You use the low-level VIs to optimize one or more aspects of interaction with the instrument. If you want to check the instrument status, call the IviPwrMeter Error-Query.vi at the conclusion of the sequence. (2) If the instrument cannot abort an initiated acquisition, this VI returns the IVI_ERROR_FUNCTION_NOT_SUPPORTED error. |
 |
instrument handle The instrument handle that you obtain from the IviPwrMeter Initialize or IviPwrMeter Initialize With Options VIs. |
 |
error in (no error) The error in cluster can accept error information wired from VIs previously called. Use this information to decide if any functionality should be bypassed in the event of errors from other VIs.
The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed. |
 |
instrument handle out The instrument handle that you obtain from the IviPwrMeter Initialize or IviPwrMeter Initialize With Options VIs. |
 |
error out The error out cluster passes error or warning information out of a VI to be used by other VIs.
The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed. |