IviScope Configure Trigger Coupling
IviScope Base Capability Group
This VI configures the trigger coupling.
 |
instrument handle The instrument handle that you obtain from the IviScope Initialize or the IviScope Initialize With Options VI. |
 |
trigger coupling Pass the trigger coupling. The driver uses this value to set the IviScope Trigger Coupling property.
Defined Values: IVISCOPE_VAL_AC—The oscilloscope AC couples the trigger signal. IVISCOPE_VAL_DC—The oscilloscope DC couples the trigger signal. IVISCOPE_VAL_LF_REJECT—The oscilloscope filters out the low frequencies from the trigger signal. IVISCOPE_VAL_HF_REJECT—The oscilloscope filters out the high frequencies from the trigger signal. IVISCOPE_VAL_NOISE_REJECT—The oscilloscope filters out the noise from the trigger signal. Default Value: IVISCOPE_VAL_DC |
 |
error in (no error) The error in cluster can accept error information wired from VIs previously called. Use this information to decide if any functionality should be bypassed in the event of errors from other VIs.
The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed. |
 |
instrument handle out The instrument handle that you obtain from the IviScope Initialize or the IviScope Initialize With Options VI. |
 |
error out The error out cluster passes error or warning information out of a VI to be used by other VIs.
The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed. |