IviUpconverter Configure ALC [ALC]
IviUpconverterALC Capability Group
This VI configures the ALC (Automatic Level Control) of the upconverter's RF output.
![IviUpconverter Configure ALC [ALC].vi](iviupconverter_configure_alc_[alc]c.gif)
 |
instrument handle The instrument handle that you obtain from the IviUpconverter Initialize VI or IviUpconverter Initialize With Options VI. The handle identifies a particular instrument session. Default Value: None |
 |
source (Internal) Pass the source of the controlling voltage for the Automatic Level Control. The RF level at the sensor point is held constant. The driver uses this value to set the IviUpconverter ALC Source [ALC] property. Valid Values: IVIUPCONVERTER_VAL_ALC_SOURCE_INTERNAL - The ALC is controlled by an internal measurement source. IVIUPCONVERTER_VAL_ALC_SOURCE_EXTERNAL - The ALC is controlled by an external voltage. Default Value: IVIUPCONVERTER_VAL_ALC_SOURCE_INTERNAL |
 |
ALC bandwidth (0.0 Hz) Pass the bandwidth of the level control. Narrow bandwidth improves noise and allows AM with modulation frequencies beyond bandwidth frequency. The driver uses this value to set the IviUpconverter ALC Bandwidth [ALC] property. Default Value: 0.0 Hz |
 |
error in (no error) The error in cluster can accept error information wired from VIs previously called. Use this information to decide if any functionality should be bypassed in the event of errors from other VIs. The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed. |
 |
instrument handle out The instrument handle that you obtain from the IviUpconverter Initialize VI or IviUpconverter Initialize With Options VI. The handle identifies a particular instrument session. Default Value: None |
 |
error out The error out cluster passes error or warning information out of a VI to be used by other VIs. The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed. |