IviUpconverter Configure Gain Step Start Stop [GST]
IviUpconverterGainStep Capability Group
This VI configures the gain steps of the upconverter sweep.
![IviUpconverter Configure Gain Step Start Stop [GST].vi](iviupconverter_configure_gain_step_start_stop_[gst]c.gif)
 |
instrument handle The instrument handle that you obtain from the IviUpconverter Initialize VI or IviUpconverter Initialize With Options VI. The handle identifies a particular instrument session. Default Value: None |
 |
gain step start (-10.0 dB) Pass the start gain of the stepped sweep. The driver uses this value to set the IviUpconverter Gain Step Start [GST] property. Default Value: -10.0 dB Notes: (1) If the stop gain is less than the start gain, the gain decreases during the sweep. |
|
|
gain step stop (-0.0 dB) Pass the stop gain of the stepped sweep. The driver uses this value to set the IviUpconverter Gain Step Stop [GST] property. Default Value: -0.0 dB Notes: (1) If the stop gain is less than the start gain, the gain decreases during the sweep. |
 |
error in (no error) The error in cluster can accept error information wired from VIs previously called. Use this information to decide if any functionality should be bypassed in the event of errors from other VIs. The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed. |
|
|
gain step size (0.1 dB) Pass the step size. The driver uses this value to set the IviUpconverter Gain Step Size [GST] property. Default Value: 0.1 dB |
 |
instrument handle out The instrument handle that you obtain from the IviUpconverter Initialize VI or IviUpconverter Initialize With Options VI. The handle identifies a particular instrument session. Default Value: None |
 |
error out The error out cluster passes error or warning information out of a VI to be used by other VIs. The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed. |