IviUpconverter Configure Gain Sweep Start Stop [GSW]
IviUpconverterGainSweep Capability Group
This VI configures the start and stop gain for the sweep.
![IviUpconverter Configure Gain Sweep Start Stop [GSW].vi](iviupconverter_configure_gain_sweep_start_stop_[gsw]c.gif)
 |
instrument handle The instrument handle that you obtain from the IviUpconverter Initialize VI or IviUpconverter Initialize With Options VI. The handle identifies a particular instrument session. Default Value: None |
 |
gain sweep start (-10.0 dB) Pass the start gain of the sweep. The driver uses this value to set the IviUpconverter Gain Sweep Start [GSW] property. Default Value: -10.0 dB Notes: (1) If the stop gain is less than the start gain, the gain decreases during the sweep. |
|
|
gain sweep stop (0.0 dB) Pass the stop gain of the sweep. The driver uses this value to set the IviUpconverter Gain Sweep Stop [GSW] property. Default Value: -0.0 dB Notes: (1) If the stop gain is less than the start gain, the gain decreases during the sweep. |
 |
error in (no error) The error in cluster can accept error information wired from VIs previously called. Use this information to decide if any functionality should be bypassed in the event of errors from other VIs. The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed. |
 |
instrument handle out The instrument handle that you obtain from the IviUpconverter Initialize VI or IviUpconverter Initialize With Options VI. The handle identifies a particular instrument session. Default Value: None |
 |
error out The error out cluster passes error or warning information out of a VI to be used by other VIs. The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed. |