IviUpconverter Configure Power Sweep Start Stop [PSW]
IviUpconverterPowerSweep Capability Group
This VI configures the start and stop power for the sweep.
![IviUpconverter Configure Power Sweep Start Stop [PSW].vi](iviupconverter_configure_power_sweep_start_stop_[psw]c.gif)
 |
instrument handle The instrument handle that you obtain from the IviUpconverter Initialize VI or IviUpconverter Initialize With Options VI. The handle identifies a particular instrument session. Default Value: None |
 |
power sweep start (-50.0 dBm) Pass the start power of the sweep. The driver uses this value to set the IviUpconverter Power Sweep Start [PSW] property. Default Value: -50.0 dBm Notes: (1) If the stop power is less than the start power, the power decreases during the sweep. |
|
|
power sweep stop (-10.0 dBm) Pass the stop power of the sweep. The driver uses this value to set the IviUpconverter Power Sweep Stop [PSW] property. Default Value: -10.0 dBm Notes: (1) If the stop power is less than the start power, the power decreases during the sweep. |
 |
error in (no error) The error in cluster can accept error information wired from VIs previously called. Use this information to decide if any functionality should be bypassed in the event of errors from other VIs. The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed. |
 |
instrument handle out The instrument handle that you obtain from the IviUpconverter Initialize VI or IviUpconverter Initialize With Options VI. The handle identifies a particular instrument session. Default Value: None |
 |
error out The error out cluster passes error or warning information out of a VI to be used by other VIs. The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed. |