IviUpconverter Send Software Trigger [SWT]
IviUpconverterSoftwareTrigger Capability Group
This VI sends a command to trigger the upconverter. Call this VI if you pass Software Trigger for the trigger source parameter of the IviUpconverter Configure Sweep VI.
 |
Note This VI does not check the instrument status. Typically, you call this VI only in a sequence of calls to other low-level driver VIs. The sequence performs one operation. You use the low-level VIs to optimize one or more aspects of interaction with the instrument. To check the instrument status, call the IviUpconverter Error-Query VI at the conclusion of the sequence. |
![IviUpconverter Send Software Trigger [SWT].vi](iviupconverter_send_software_trigger_[swt]c.gif)
 |
instrument handle The instrument handle that you obtain from the IviUpconverter Initialize VI or IviUpconverter Initialize With Options VI. The handle identifies a particular instrument session. Default Value: None |
 |
error in (no error) The error in cluster can accept error information wired from VIs previously called. Use this information to decide if any functionality should be bypassed in the event of errors from other VIs. The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed. |
 |
instrument handle out The instrument handle that you obtain from the IviUpconverter Initialize VI or IviUpconverter Initialize With Options VI. The handle identifies a particular instrument session. Default Value: None |
 |
error out The error out cluster passes error or warning information out of a VI to be used by other VIs. The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed. |